The GPS tracker has built-in motion detection. However, in order to be able to distinguish whether the motorcycle is being driven by the owner or is being taken away by someone unauthorized, it is necessary to establish a connection to the ignition plus.
On most motorcycles there are prepared cables under the seat or behind the front light, which can be used for accessories such as GPS trackers and heated grips.
In the manual of your motorcycle you will find the designation of the ignition plus e.g.: ACC2 and where prepared cables are located.
Connect the enclosed wire-tap connector to the ignition + cable of the motorcycle. Then connect the red end of the cable "2-Ignition+" to the wire-tap connector. Then connect the "2-Ignition+" plug of the tracker to the other end of the cable.